how to draw 3d bubble writing

Download Article

Download Article

3D cake letters are groovy for headings, posters, and birthday cards. They're not too tricky to larn how to draw yourself. Draw block messages by making rectangular outlines around regular letters. Make them 3D past calculation perspective with diagonal lines, and then add shadows to brand your messages really popular.

Sample Alphabets

1. 1

   Write large uppercase letters in the middle of your page with a pencil. It's also possible to practise lower case letters in 3D, simply it'south much easier in upper case, because more than of the letters accept straight lines. Write the messages in pencil considering they will human activity as guidelines. Yous will erase them subsequently!^[1]

   • It may be easier to practice on graph paper. Following the lines printed on the graph paper can aid you create nice, even lines for your letters.
   • Be sure to leave more than space than y'all commonly would between the letters so that yous will accept room to outline them.

2. 2

   Sketch block outlines effectually your letters in pencil. If yous're drawing on graph paper, just trace the graph paper in rectangular blocks around your messages. Make sure the messages are all about the same width. If you're drawing free-mitt, it may help to lightly sketch guidelines above and beneath your letters and so that they all end up the aforementioned size.^[two]

   • For letters with curves, like "C," effort to draw a polish curve and make the letter of the alphabet the same width equally the straight-edged letters.
   • Don't forget to outline the inside of holes in messages like "R" and "A."

   Advert

3. three

   Go over your block outlines in pen or marker to finalize them. Don't trace over the letters that yous originally wrote, just trace over your cake outlines. Try to make smooth, clean lines instead of lite, feathery lines. Smooth, straight lines volition look much neater! If it helps, attempt using a straight edge ruler.

   • Await for the ink to dry earlier erasing your pencil marks so that you don't smudge the ink.

4. 4

   Erase all of the pencil markings. Use a large, soft eraser to erase all of the stray pencil marks and sketched lines. At present all that you volition have on your paper are the final block outlines of the letters.^[3]

   • Clear abroad the eraser shavings so that they don't arrive the fashion.

   Advertising

1. one

   Choose a vantage point for your letters to make them 3D. Determine whether you want to view your block letters from above or beneath, and whether you want them to face to the right or the left. If you were looking at them straight on from the front end, they'd merely look like ordinary block letters, and then you lot have to tilt them to brand it 3D.^[four]

   • Your vantage point will determine the direction your draw your diagonal lines in the next step.

2. two

   Draw small diagonal lines from the corners of your messages in pencil. Be sure to depict all of the lines and so that they tilt in the same direction. If it helps, choose a vanishing point in the background. Then, use a straight edge to line up each line with that vanishing signal before you lot draw it. If you're viewing your messages from higher up, the lines should tilt upwardly. If you're viewing from below, they should tilt down. Draw the lines to the right if y'all desire your letter of the alphabet facing left and to the correct if you want them facing right.^[5]

   • Practise drawing these lines in different directions until you lot figure out what you like.
   • Most people depict their block messages viewed from above.

3. 3

   Connect the ends of the diagonal lines together. Use horizontal, vertical, and curved lines to connect the ends of the diagonal lines. This will be cartoon the dorsum side of the messages.^[6]

   • Think of it like drawing a cube, where you lot first draw a foursquare, then small diagonal lines, and and so connect the lines in another square. It's only similar that, except the shapes are letters instead of squares.

   Advertising

1. one

   Imagine that your vantage bespeak is a light source. This will aid you visualize the style the calorie-free and shadow volition autumn over your letters, so that y'all tin shade them consistently. Making your calorie-free source be in the same place as your vantage point simplifies things, merely you can choose another place for your imaginary lite source if y'all prefer.^[7]

   • It may help to lightly draw a little shining sun in one of the top corners of the folio to assistance you call back. Yous can erase it afterwards.
   • Most light sources are from above, like the dominicus, the moon, and overhead lighting, so that will look the nearly normal. But, y'all tin can have the light source be on the bottom if you want the letters to look similar they're behind stage lights.

2. 2

   Darken the surfaces away from the lite source. Utilize a dark pencil, pen, or marking, to shade in the surfaces of the letter that face abroad from the light source, which would exist in shade. Leave the surfaces that are facing the light source a lighter color.^[8]

   • If your calorie-free source is in the upper left corner of your folio, all the right manus surfaces of your letters will be dark.

3. 3

   Add cast shadows to the letters, if you'd like. Once again, await at where the light source is, and draw the shape of the letter falling away from the light source, onto the imaginary floor. It can be a bit catchy to get the shape of the cast shadow to await realistic, and so this footstep is optional.^[ix]

   • If you're adding cast shadow, make certain to also add in cast shadows in holes in the letters. For case, in the letter "R," one part of the top bit of the letter would cast a shadow on the other bit.

4. four

   Finished.

   Advert

Add together New Question

• Question

  How do I draw cursive blocks?

  

  Write the words with spacing in good cursive handwriting. Outline with 5 mm spacing on both sides and erase the writing inside. You can fill colour to brand an awesome piece of art.

• Question

  How do I draw a 3D Roman letter?

  

  Axis History

  Customs Answer

  It's the aforementioned concept, just find the edges and make lines to a single point on the newspaper.

• Question

  How can I do the letter A?

  

  Write the letter of the alphabet A commonly, and so outline the shape and erase your original lines.

• Question

  What is the proper scale/ratio of summit to width?

  

  Information technology will depend to your material surface size. The best way to know is to draw two lines up and down depending to the size of the surface, and then measure out the elevation of those ii lines.

• Question

  How do I draw block letter of the alphabet S?

  

  Depict the box of one square in a fixed size. In the box, draw ii lines top, bottom, left, right and centre. Within those lines depict letter "South": The top, eye and lesser line covers the three vertical lines of letter S, and the left and correct lines covers round corners.

• Question

  How practise I do an O as a 3D block letter of the alphabet?

  

  Y'all simply describe a circle with some other circle inside of the original circumvolve, and then you take a 3D O that is uppercase. Exercise the aforementioned for a lowercase o, merely smaller.

• Question

  How practice I describe the letter U in 3D block letters?

  

  You lot follow footstep number one just then draw a J to connect the ii upsides and so that is all that you have to exercise except add the shading.

Ask a Question

200 characters left

Include your e-mail address to get a message when this question is answered.

Submit

Advertising

• Showtime drawing your letters with a pencil and only trace over them with a pen when yous experience confident.

• If your letters volition be shown on a computer display, the light source should be on the upper left. This is the convention that most estimator fonts try to observe.

Cheers for submitting a tip for review!

Advertizing

About This Commodity

Article Summary X

To draw 3D block letters, beginning by sketching out thick lettering in the middle of your paper using pencil. Next, mark an "X" in the left or right upper corner of the paper. Then, sketch lines from the edges of your letters to the "Ten" marker and don't forget to depict lines to the far corners of your messages equally well. Later on you've fatigued the lines, utilise them every bit a guide to create thick dimension on each letter. Finally, erase the pencil lines and outline the concluding drawing in black pen or marker so information technology stands out. For tips on how to draw pyramid messages, read on!

Did this summary help you?

Thanks to all authors for creating a folio that has been read 1,127,267 times.

Did this commodity assistance yous?

wraysigiand.blogspot.com

Source: https://www.wikihow.com/Draw-3D-Block-Letters

Share this post